Stiletto Advantage Q + Guardian Hub 801321 Stainless Steel Boat Propeller
- Part(s): #801321
- Manufacturer: Stiletto
- Brand:Advantage Q + Guardian Hub
- Material: Stainless Steel
- Diameter: 13 - 1/8
- Pitch: 21
- Blades: 3
- Rotation: Standard (Clockwise)
- Usually Ships Within: Business Day
View Related Boat Propellers
Advantage Q + Guardian Hub Stainless Steel Boat Propellers
- Excellent hole shot, strong mid-range acceleration, and top speed describe the Stiletto ADVANTAGE Q Stainless Steel Boat Propeller Series. This series gives you the advantage when skiing, carrying loads and in adverse water conditions. This is the choice for all around performance; its your ADVANTAGE. Stiletto props are made in the USA.
- The ADVANTAGE Q series is specially designed for 4-Stroke, 40-150 horsepower engines with 4.25" diameter gear case housings.
- ADVANTAGE Q utilizes the Stiletto Guardian Hub system.
SUPERIOR BLADE DESIGN - Stiletto Propellers are truly the stainless edge. All Stiletto Propellers are of a progressive pitch design. Cupped blades help reduce the chance of cavitation, therefore, increasing the efficiency and performance of your engine.
TOTAL PERFORMANCE - Stiletto Propellers are designed to help each boat and engine combination achieve its peak performance at all throttle levels: low end, mid-range, and top end. Stiletto Propellers are designed to outperform the mass produced aluminum and stainless steel stock/utility propellers. Stiletto props are made in the USA.
RELIABILITY - Stiletto Propellers are one-piece investment cast for exceptional strength and safety. This manufacturing process provides superior consistency in blade shape and accuracy in pitch. Some so-called performance propellers are produced using welded-on blades, which are not as structurally sound nor are they as reliable as a one-piece casting.
- Scores shown are based on all Stiletto Advantage Q with Guardian Hub propeller reviews.
Propeller reviewed on Aug 11th, 2015
I run a 1725 Lund Explorer Sport with a 115 Mercury 4 stroke and I always carry a load with people and equipment, therefore I have always had struggle to get on plane running a 13x19 aluminum prop. I tried down sizing to a 17" pitch prop and it helped a bit getting on plane quicker but lost out on the top end. I finally bit the bullet and invested in a Stainless prop. It has made all the difference in the world. The Stiletto prop in 19 Pitch with the vent holes has fixed my hole shot and I still get a good top end speed. Im a satisfied customer.
Propeller reviewed on Apr 11th, 2015
Customer service did not return phone call and email when item is not received. Very disappointed in customer service. UPS lost the package and I'm asking for replacement propeller or a refund,but respond from customer service.
Propeller reviewed on Sep 10th, 2014
Received order very fast and immediately went on my Yamaha F115. You have to squirrel around with the hub system ( I had to mount and remount 3 times ) to get it it to fit at just the right point that allows the spline lock nut to fit properly. I used the Stilletto ADVANTAGE Q-13 1/8 X 19 to replace my stock aluminum 13 1/2 X 19. The aluminum propeller outperforms the SS on hole shot rather substantially--you only see a difference on top end where I gained perhaps 1-2 mph depending on conditions at the lake. Quality seems to be fair although I was surprised to see so many unpolished sanding marks all over the prop. I will replace the Stilletto in the near future but I should have done more homework before I purchased a SS prop. I am rather satisfied with the aluminum so assumed the SS would give me slight advantage and based not the recommendation of the IBoats prop staff--just did not turn out as I expected.
Propeller reviewed on Aug 14th, 2014
was shipped in timely maner had to shave bushing to fit prop, was bulged out from pressed in gear other than that prop works fine
Propeller reviewed on Apr 27th, 2013
prop was not the right size for my application. i tried to contact iboats for a return and was never responded to.