OMC - Outboard Marine Model 800, Cobra & King Cobra 8.2L Boat Propellers Sterndrive 1990 Any HP

OMC - Outboard Marine Any HP 1990 Sterndrive Propellers

You Are Viewing Available Prop Pitches For:

  • Manufacturer: OMC - Outboard Marine
  • Horsepower: Any HP
  • Years: 1990
  • Model: Model 800, Cobra & King Cobra 8.2L Sterndrive
  • Specs: Non SX Drive, Thru Hub Exhaust & 15 Tooth Spline, 4-¾ Gearcase
  • Max RPM: Not Available
Where to Find Your Prop Pitch

Please Choose A Propeller Pitch:

 
Propeller Pitch
Your Engine

Where to Find Your Prop Pitch

Pitch stamped on inner Hub ...or
around the inner hub.
Pitch stamped on outer Hub Pitch is stamped on the outer prop hub...

Look on the outer hub of the prop near the blades or inside the hub.

Most props are stamped with a series of numbers.

Pitch is always the last number listed.

Example: 3 x 16 x 24.5R

3 - Number of Blades (occasionally displayed)

16 - Diameter

24.5 - Pitch

R - Direction of Rotation (R = Right/Standard, L = Left/Counter)

Prop Pitch & RPM's

For safety, and efficient performance, it is critical that your engine operates within the RPM range recommended by the manufacturer.

A change in the prop pitch will increase or decrease the engine RPM's and can be used to bring them into the recommended range. A 2" pitch increase (for example, from 21" to 23") will result in approximately a 300-400 RPM decrease and vice versa.

The correct prop allows the engine's RPM to run within the top end of the manufacturers recommendation.

Propeller Help Guide

iboats.com Exclusives